The easiest ways to hang a curtain rod without brackets is to use command hooks, coat hooks, Kwik-Hang curtain-rod brackets, or tension rod curtains.
What can I use instead of curtain brackets?
One of the most common things that people use as a curtain rod alternative is a copper pipe. Copper pipes are interesting because they can provide you with a very unique look. Many people are drawn to the look of copper, so using a copper pipe as a curtain rod is going to be appealing.
How do you hang a curtain rod without an anchor?
If there isn’t a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets. Without a drywall anchor, a screw won’t be able to hold the weight of your curtain rod.
Can you hang curtain rods with Command Strips?
Many landlords don’t allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.
How far can a curtain rod span without support?
Over 96 inches, a third rod bracket is required as a center support; this is mandatory! Having said that, a 2 inch or 3-inch diameter pole can span a distance up to a full 12-feet without flexing or bowing using only two end brackets.
How do you support long curtain rods?
Depending on the particular cause of the drooping rod in your situation, one method may work better than another.
- 1 – Move Your Support Brackets. …
- 2 – Add Additional Support Brackets. …
- 3 – Insert a Support Rod. …
- 4 – Use a Lighter Fabric. …
- 5 – Shorten the Curtain. …
- 6 – Protect the Curtain with a Barrier.
Do curtain rods need to be drilled into studs?
So you do NOT need a stud to hang a curtain rod, but you do need a different type of wall anchor to help hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.
Should I use anchors for curtain rods?
You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Having a hand tool ready often makes this job easier since it can be hard to use a larger electric drill when mounting curtain rod hardware to the wall.
Why does my tension shower rod keep falling down?
Tension rods can fall if the walls of your shower are dry. Drywall causes the rods to become loose and end up falling due to a lack of strong support. In order to avoid this issue, ensure the rods have extra support such as by using glue shelf rubber lining on the walls as we have discussed below.
Can you hang curtain rods without drilling holes?
Similar to stick on curtain rods, Command hooks are another answer to how to hang curtains without drilling into the wall. In fact, they even make some specifically for this purpose. All you need to do is hang a hook on either side of the window and pop a rod it, and you’re done!
Can multiple command hooks hold more weight?
Furthermore, can multiple command strips hold more weight? If the hook base is wide enough for it, the instructions usually indicate to put strips side by side, and also indicate it can hold double the weight on the hook packages. Perhaps this is obvious, but you can NOT double the weight by layering two strips.
What is the strongest command hook?
Jumbo hooks allow you to hold up to 7.5 pounds! Using the revolutionary Command™ Adhesive, Command™ Decorative Hooks hold strongly on a variety of surfaces, including paint, wood, tile and more.
Command™ Jumbo Quartz Hook.
|Package Contents||1 Hook, 2 Strips|
|Weight Capacity||7-1/2 pounds|
What is the proper placement of curtain rods?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
How far should a curtain rod be from the wall?
When installing curtain rods, hang the rod so that it extends at least 3 or 4 inches beyond the window on each side, which allows your curtains to overlap both the window and the wall to prevent light from leaking in around the window’s edges.
How far from the wall should a clothes rod be?
For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.